Quy trình sản xuất gạch hiện đại của Apodio

Hiện nay trên thị trường có không ít đơn vị sản xuất gạch ốp lát, tuy nhiên, Apodio luôn là cái tên được khách hàng ưu tiên hơn cả bởi gạch Apodio có chất lượng cao, ổn định và mẫu mã đa dạng. Để có những sản phẩm chất lượng đạt chuẩn châu Âu, Apodio đã mạnh dạn đầu tư vào dây chuyền sản xuất hiện đại cũng như kiểm soát gắt gao trong từng quy trình sản xuất gạch.

Quy trình sản xuất gạch hiện đại của Apodio

1. Nguyên liệu thô

Bước đầu tiên trong quá trình sản xuất gạch là chuẩn bị nguyên liệu thô đạt chuẩn. Đây là các ô xít tự nhiên gồm đất sét, trường thạch, cao lanh cao cấp,… được kiểm duyệt từng xe và lưu kho trong đủ thời gian. Sau đó, nguyên liệu được cân theo tỷ lệ và trải qua nghiền 2 giai đoạn (nghiền gián đoạn và nghiền liên tục) nhằm tạo độ đồng đều, ổn định nhất cho xương gạch. Apodio là đơn vị đầu tiên xử lý nghiền nguyên liệu 2 bước.

2. Sấy phun tạo hạt

Nguyên liệu sau khi nghiền, được ủ dưới bể gọi là hồ liệu. Hồ liệu được ủ đủ thời gian sẽ được phun trực tiếp lên tháp sấy phun để tạo hạt. Hồ liệu có nguồn gốc 100% từ tự nhiên và không thêm bất cứ loại phụ gia, hóa chất nào. 50% vật liệu thải ở khu vực này sẽ được tái sử dụng.

3. Ủ nguyên liệu

Sau khi tạo hạt theo kích cỡ và cấp phối, nguyên liệu được đưa lên 12 silo thể tích 90m3 để ủ cho đồng đều về nhiệt độ, độ ẩm và cường độ. Khi đưa sang sản xuất, nguyên liệu được lấy từ ít nhất 3 silo khác nhau để đảm bảo độ đồng nhất.

4. Ép

Sau khi ủ đủ thời gian, nguyên liệu sẽ được chuyển đến máy ép. Tại đây, nguyên liệu được tái tạo về trạng thái tự nhiên của đá mà không cần bất cứ loại hóa chất hay keo nào. Các nguyên liệu dư thừa ở khu vực này sẽ được tái sử dụng 100%.

5. Sấy

Sau khi ép, gạch Apodio sẽ được sấy ở nhiệt độ tối đa là 230 độ C. Toàn bộ nhiệt độ sấy được tái sử dụng nhiệt dư thừa của lò nung trong quá trình sản xuất. Điều này sẽ giúp nhà máy tiết kiệm nhiên liệu và góp phần bảo vệ môi trường. Gạch sau khi sấy sẽ có độ ẩm từ 0.1 đến 0.2%.

6. Dây chuyền men

Sau khi sấy, gạch Apodio sẽ được phủ 3 lớp men chất lượng cao nhằm bảo đảm các họa tiết in kỹ thuật số được thể hiện và bảo vệ tốt nhất. Bên cạnh đó, một số hiệu ứng đặc biệt được thể hiện bằng các công nghệ và thiết bị máy móc hiện đại đến từ châu Âu. Nước dùng để rửa, vệ sinh các phế phẩm trên dây chuyền men cũng được tái chế và tái sử dụng 80%.

7. Máy in kỹ thuật số

Công nghệ in kỹ thuật số hiện đại, độ phân giải cao mang đến các họa tiết chân thực, sắc nét. Mực in được nhập khẩu 100% từ Tây Ban Nha. Đây là loại mực cao cấp, cập nhật tone màu mới nhất, an toàn cho sức khỏe và bảo vệ môi trường. Ở giai đoạn này, các hiệu ứng như carving, metallic, engraving cũng được tạo ra để làm phong phú sản phẩm. Apodio có hệ thống tạo định hình bề mặt bằng hạt hiện đại nhất thế giới.

8. Lò nung

Nhiệt độ tối đa ở lò nung của Apodio là 1250 độ C. Hệ thống ổn định nhiệt và làm lạnh nhanh được điều chỉnh hoàn toàn tự động bằng hệ thống cảm biến tinh vi. Lò nung sử dụng gas lỏng đảm bảo an toàn, sạch sẽ và mang đến những sản phẩm tốt nhất, bảo vệ môi trường. 

9. Dây chuyền mài

Apodio là đơn vị đầu tiên sử dụng dây chuyền mài hiện đại của Ancora, Ý. Với dây chuyền mài hiện đại, gạch sẽ có độ bóng xuất sắc, đạt hơn 100 GU. Mài cạnh khô nên toàn bộ bột mài dư thừa được tái sử dụng để bảo vệ môi trường.

10. Kiểm soát chất lượng

Chất lượng được kiểm soát bằng hệ thống máy scan mắt thần hiện đại. Apodio có đội ngũ kỹ thuật viên KCS trình độ chuyên môn cao để kiểm soát chất lượng. Toàn bộ quá trình này cũng sẽ được nhân viên quản lý chất lượng của Apodio giám sát.

11. Đóng gói

Sản phẩm được đóng gói hoàn toàn bằng robot tự động theo tiêu chuẩn quốc tế. Các pallet gạch được nẹp các góc và quấn màng nilong để được bảo vệ một cách tốt nhất. 

____________________________

CÔNG TY TNHH MTV APODIO – Thương hiệu gạch ốp lát cao cấp chuẩn Châu Âu hàng đầu Việt Nam

Địa chỉ: Khu Thanh Bình, Phường Thanh Vinh, Thị xã Phú Thọ, Tỉnh Phú Thọ

Hotline: 0901 27 33 88

Xem thêm sản phẩm tại: https://apodio.vn/

Youtube: https://www.youtube.com/@apodio8663

 

Apodio Tile Production Progress with advanced technology 

There are many ceramic tile manufacturers currently in the market. Nonetheless, Apodio has always been the most popular name due to its high quality, durability and diversity in designs. In order to achieve such high-quality products that meet European standards, Apodio has generously invested in modern production lines as well as strictly controlled in every production process.

1. Raw materials

The first step in the production process requires the quality standard for raw materials. These are natural oxides, including high-quality clay, feldspar and kaolin, which are strictly tested and stored before mass production After that, the raw materials are weighed following proportion, mixed and ground  through two  stages to create the most uniform and stable for the body. Indeed, Apodio is the only manufacturer  in Vietnam which applies the  two-step wet grinding.

2. Spraying – drying 

After the wet grinding stage, products are kept in an underground tank. This product is called slip. Slip requires a time for rest before being sent to the atomiser to create dried stocked materials. The slip are 100% natural materials without any additives or chemicals. Indeed, 50% of material from the slip can be recycled and reused.

3. Powder stocking

The obtained powder is sent to 12 silos with a volume of 90m3 for a rest to create uniformity in temperature, moisture and intensity. During mass production, the powder must be taken from at least three different silos to ensure uniformity.

4. Pressing

After the powder has enough time for rest,  they will be transferred to the pressing stage. In this stage, the raw material is recreated to the natural form of the stone without any glue or chemicals. The remaining powder  at this stage can  be 100% recycled and reused.

5. Drying

After pressing, the tiles are dried at a maximum of 230 degrees Celsius. The drying temperature is generated from the excess heat of the kiln. This helps the factory save fuel, contributing to environmental protection. After drying, the tile will have moisture  from 0.1 – 0.2%.

6. Glaze applying

After drying, the body will be covered with three layers of high-quality glaze to ensure the best quality of the digital printing on the tile surface. Besides, special effects are only produced by our advanced technologies and equipment from Europe. Water used for washing and cleaning on the glaze applying stage is recycled and reused up to 80%.

7. Digital printing

Apodio uses advanced high-resolution digital printing technology to recreate realistic and sharp veins on tile design. Printing ink is imported from Spain. This is a premium-quality ink, not only containing up-to-date color tones, but also safe for human health and the environment at the same time. At this stage, effects on the tile surface such as carving, engraving, and metallic are also created to make  the product sophisticated. Apodio profoundly uses the most advanced punch and granilla to create the most differentiated tiles.

8. Firing

The maximum temperature used in the kiln is 1250 degrees Celsius. The system is fully automatic controlled by a sophisticated sensor system to control temperature stabilization and rapid cooling. Moreover, the kiln uses liquid gas, so that it is always clean and safe.

9. Cutting and Polishing

Apodio is proud to be the first manufacturer in Vietnam  using the advanced cutting and polishing production lines of Ancora, Italy. As a result, tiles are highly glossy polished, reaching more than 100 GU. The dry edge cutting  is friendly to the environment because the excess powder at the cutting process can be recycled and reused.

10. Quality control

The quality of tiles is controlled by an advanced scanner system. In addition, Apodio also has a team of professional technicians to control the quality. The entire production progress of Apodio is always controlled and evaluated by qualified quality management staff to ensure the best product quality.

11. Packing

Apodio implements automatic robots in the packaging stage according to international standards. The tile pallets are protected by nylon film and in the corners to avoid damage.

_______________

APODIO – The leading porcelain tile brand in Vietnam with European standard and quality

Address: Thanh Binh area, Thanh Vinh ward, Phu Tho town, Phu Tho province

Hotline: 0901 27 33 88

More information: https://apodio.vn/

Youtube: https://www.youtube.com/@apodio8663

 

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *